OREGON 200ATMD009 20" Hard nose chainsaw bar 3/8 .050 72 DL

THIS 200ATMD009 PROFESSIONAL hard nose Oregon BAR IS 20 INCH. (1.3MM) 3/8 PITCH  .050 GAUGE AND USES 72 DRIVE LINK CHAIN.THIS BAR IS A SOLID CONSTRUCTED Metal BODY WITH No SPROCKET NOSE.

This bar fits the following saws with a 3/8 PITCH SPROCKET.

  • Dolmar: PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
  • Efco: 181 (After Aug 07), MT 7200, MT 8200
  • Husqvarna: 1100 CD, 160, 162, 181, 185, 2100 CD, 2101, 266 XP, 268, 272 XP, 281, 285, 288 XP, 298, 3120 XP, 362 (9mm Studs), 365, 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 480 CD, 562 XP, 570, 575 XP, 576 XP, 61, 65, 66, 70, 77
  • Jonsered: 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, 625, 630, 670, CS 2165, CS 2166, CS 2171, CS 2172, CS 2186, CS 2188, Ripping Mill
  • Makita: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
  • Partner: 1655, 2055, 550, 650, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
  • Poulan/PoulanPRO: 425, 445, 475, 505, PRO415
  • Shindawa (SDK): 550, 575, 577, 680, 695, 757
  • Solo: 603, 662, 665, 667, 670, 675, 680, 681, 690, 694
  • NOTE- .325 pitch sprocket must be changed to 3/8 pitch to use this bar and chains

 

CHAIN CHOICES FOR THIS BAR.

72LGX072 G Full Chisel

72LPX072G Full Chisel super 70

72JGX072G Full Skip Full Chisel

72APX072G full skip Semi-chisel

72DPX072G -Semi-chisel

72RD072G- Ripping

72V072G -Low-kick full Chisel

72JPX072G - Skiptooth full chisel

72CL072G- Square ground full chisel

72CJ072G Square ground full chisel full skip

72CK072G Square groud half skip full chisel

OREGON 200ATMD009 20" Hard nose chainsaw bar 3/8 .050 72 DL
Click To Enlarge
  • Item #: 200ATMD009
  * Marked fields are required.
Qty*
Price $49.99