OREGON 200GLHD196 20" Chainsaw guide Bar 3/8 PITCH .050 70 DL

THIS Oregon PRO-lite BAR IS 20 INCH. 3/8 PITCH (1.3MM)   .050 GAUGE AND USES 70 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE .375 inch slot or 9.5mm

Fits the following chainsaws with 3/8" Pitch Drive Sprockets:

  • Alpina/Castor A-70, CP-55, CP-56, CP-65, CP-66, CP-70, PRO-55, PRO-56, PRO-65, PRO-66, PRO-70
  • Echo CS-900, CS-1001
  • Homelite 35SL, 330, 350, 360, 400, 410, 450, 460, 540, 550, 650, 700, 800, 825, 850, 900, 922, 923, XL 924, XL925, SUPER XL, SUPER XL-AO, V955, XL-12, XL-15, XL400, XL700 Series, XL800 Series, XL900 Series
  • John Deere CS71, CS81
  • Jonsered 60, 61, 62, 66, 70, 75, 77, 80, 81, 90, 110, 111, 601, 621, 801, 820, 830, 910, 920, 930, 1020, 2350 
  • Olympyk (OLEO-MAC) 250, 250A, 251, 252, 254, 260, 261, 264, 272, 280, 284, 355, 460A SUPER, 461, 480A SUPER, 481, 482 POULAN/POULAN PRO 655, 6900, 7700, 8500
  • Remington LOGGER, PL-4, PL-5, PL-55, SL-4, SL-9, SL-10, SL-11, SL-14, SL-16, WOODSMAN
  • Stanley CS11 
  • * Note Jonsered and Olympyk models will have to have the inside of the bar slot hand filed .020 to .395 for proper fit or use D024 mount in .058 gauge. A 71 drive link chain instead of 70 will work if using a 8 tooth drive sprocket.

*CHAIN CHOICES FOR THIS BAR.

72LGX070G Full Chisel

72LPX070G full chisel super 70

72JGX070G Full Skip Full Chisel

72JPX070G Skiptooth full chisel

72APX070G full skip Semi-chisel

72DPX070G -Semi-chisel

72RD070G- Ripping

72V070G -Low-kick

72JPX070G - Skiptooth full chisel

72CL070G- Square ground chisel

72CJ070G Square ground chisel full skip

72CK070G Square ground half skip chisel

OREGON 200GLHD196 20" Chainsaw guide Bar 3/8 PITCH .050 70 DL
Click To Enlarge
  • Item #: 200GLHD196
  * Marked fields are required.
Qty*
Price $50.99
Sale Price $44.99
2 or more $41.99 each