OREGON 288RNDD009 28" Pro chainsaw guide bar 3/8 .058 92 DL

THIS PROFESSIONAL BAR IS 28 INCH. (1.5MM) 3/8 PITCH  .058 GAUGE AND USES 92 DRIVE LINK CHAIN.THIS BAR IS A POWERMATCH SOLID CONSTRUCTED BODY WITH ONE RIVET REPLACEABLE SPROCKET NOSE.

This bar fits the following saws with a 3/8 PITCH SPROCKET.

  • Dolmar: PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
  • Efco: 181 (After Aug 07), MT 7200, MT 8200
  • Husqvarna: 1100 CD, 160, 162, 181, 185, 2100 CD, 2101, 266 XP, 268, 272 XP, 281, 285, 288 XP, 298, 3120 XP, 362 (9mm Studs), 365, 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 480 CD, 562 XP, 570, 575 XP, 576 XP, 61, 65, 66, 70, 77
  • Jonsered: 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, 625, 630, 670, CS 2165, CS 2166, CS 2171, CS 2172, CS 2186, CS 2188, Ripping Mill
  • Makita: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
  • Partner: 1655, 2055, 550, 650, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
  • Poulan/PoulanPRO: 425, 445, 475, 505, PRO415
  • Shindawa (SDK): 550, 575, 577, 680, 695, 757
  • Solo: 603, 662, 665, 667, 670, 675, 680, 681, 690, 694
  • NOTE- .325 pitch sprocket must be changed to 3/8 pitch to use this bar and chains

 

CHAIN CHOICES FOR THIS BAR.

73LGX092G Full Chisel

73LPX092G Full Chisel super 70

73JGX092G Full Skip Full Chisel

73DPX092G -Semi-chisel

73RD092G- Ripping

73V092G -Low-kick full Chisel

 

OREGON 288RNDD009 28" Pro chainsaw guide bar 3/8  .058 92 DL
Click To Enlarge
  • Item #: 288RNDD009
  * Marked fields are required.
Qty*
Price $66.99