OREGON 363RNFD009 36" Powermatch Guide bar 404 Pitch 104 DL .063

THIS PROFESSIONAL BAR IS 36 INCH. (1.6MM) 404 PITCH  .063 GAUGE AND USES 104 DRIVE LINK CHAIN.THIS BAR IS A POWERMATCH SOLID CONSTRUCTED BODY WITH ONE RIVET REPLACEABLE SPROCKET NOSE.

This bar fits the following saws with a .404 PITCH SPROCKET.

  • Dolmar: PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
  • Efco: 181 (After Aug 07), MT 7200, MT 8200
  • Husqvarna: 1100 CD, 160, 162, 181, 185, 2100 CD, 2101, 266 XP, 268, 272 XP, 281, 285, 288 XP, 298, 3120 XP, 362 (9mm Studs), 365, 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 480 CD, 562 XP, 570, 575 XP, 576 XP, 61, 65, 66, 70, 77
  • Jonsered: 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, 625, 630, 670, CS 2165, CS 2166, CS 2171, CS 2172, CS 2186, CS 2188, Ripping Mill
  • Makita: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
  • Partner: 1655, 2055, 550, 650, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
  • Poulan/PoulanPRO: 425, 445, 475, 505, PRO415
  • Shindawa (SDK): 550, 575, 577, 680, 695, 757
  • Solo: 603, 662, 665, 667, 670, 675, 680, 681, 690, 694
  • NOTE- .325 or 3/8 pitch sprocket must be changed to 404 pitch to use this bar and chains

CHAIN CHOICES FOR THIS BAR.

27X104G Semi-chisel

27AX104G Semi-chisel Full Skip

68JX104G Full Skip Full Chisel

68LX104G Full Chisel

27RX104G Hyper Skip Ripping Chain

 

 

OREGON 363RNFD009 36" Powermatch Guide bar 404 Pitch 104 DL .063
Click To Enlarge
  • Item #: 363RNFD009
  * Marked fields are required.
Qty*
Price $82.99