27R220G Oregon RipCut Ripping chain .404 pitch 220 DL 063 gauge

27R220G / 27R220 Oregon RipCut Ripping chainsaw chain

.404 pitch .063 gauge 220 Drive link Rip Saw Chain

Ripping chain loop in normal full complement cutter tooth spacing.
Any sawmill worker will tell you that ripping chain is different from all other saw chains. You need a special kind of chain like this for ripping cuts, the kind that transforms raw timber into boards and planks used in homes and cabins. Oregon RipCut is designed specifically for chain type mills, producing smooth cuts with extreme efficiency.

  •  RipCut's precise ripping cuts give you a smooth surface every time you cut parallel to the wood grain. RipCut isn't recommended for handheld use, but that suits experienced millwrights just fine.
  • .404 pitch Factory ground 10-degree angle cutter tooth makes smoother and more accurate lumber when using Granberg or Alaskan chainsaw mills.
  • Sharpens at 10 degree angle with a 7/32" file (part# 70502)
  • Maintain depth gauge at .030 clearance

 If you have a 27, 52, 59 or 68 stamped on your current Oregon drive link and there are 220 drive links counted or bar stamped 404 063 220DL, then this chain will fit your saw.

Product Type  Saw Chain  Prop 65 Description

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
WARNING This professional saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this saw chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential may be available.

 

27R220G Oregon RipCut Ripping chain .404 pitch  220 DL 063 gauge
Click To Enlarge
  • Item #: 27R220 27R220G
  * Marked fields are required.
Qty*
Price $165.29
Sale Price $143.00
2 or more $141.00 each