27RX139G Oregon Hyper Skip Ripping chain .404 139 DL .063 gauge

27RX139G / 27RX139 Oregon Hyper Skip RipCut Ripping chainsaw chain

.404 pitch .063 gauge 139 Drive link Super skip Rip Saw Chain super-skip cutter sequence 

 Oregon 27RX is a specialty ripping chain designed to be used exclusively on portable sawmill slabbing machines with electric motors and 4 cycle gas engines, such as the D&L, Lucas, package and Peterson sawmills. It is built with a hyper skip chain sequence 9 inch between left and right cutters, which allows for greater chip clearance on super wide cuts. It is most commonly used to slab logs into lumber, cutting burls and stumps into table tops. This ripping chain gives you a smooth, consistent surface when cutting parallel to the grain of a log, and because it has few cutters, it is quicker to sharpen. This chain is recommended for milling purposes only, therefore not recommended for standard hand held use

  • Sharpens at 10 degree angle with a 7/32" file (part# 70502)
  • Maintain depth gauge at .030 clearance

 If you have a 27, 52, 59 or 68 stamped on your current Oregon drive link and there are 139 drive links counted or bar stamped 404 063 139DL, then this chain will fit your saw.

Product Type  Saw Chain  Prop 65 Description

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
WARNING This professional saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this saw chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential may be available.
27RX139G Oregon Hyper Skip Ripping chain .404 139 DL .063 gauge
Click To Enlarge
  • Item #: 27RX139G
  * Marked fields are required.
Price $107.00
Sale Price $73.60
2 or more $71.60 each