CRAFTSMAN /SEARS BARS

THIS DOUBLE GUARD INTENZ BAR AND CHAIN COMBO IS 10 INCH (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE 40 DRIVE LINK AND COMES WITH A 91VXL040 CHAIN. THIS BAR IS A SPROCKET NOSE. This Bar fits the following chainsaws with a 3/8 low profile sprocket:...

THIS DOUBLE GUARD INTENZ -(CHAIN TENSIONING MECHANISM BUILT IN) BAR AND CHAIN COMBO IS 12 INCH (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE 45 DRIVE LINK AND COMES WITH A 91VXL045 CHAIN. THIS BAR IS A SPROCKET NOSE. This Bar & Chain fit the...

THIS DOUBLE GUARD INTENZ -(CHAIN TENSIONING MECHANISM BUILT IN) BAR AND CHAIN COMBO IS 14 INCH (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE 52 DRIVE LINK AND COMES WITH A 91VXL052 CHAIN. THIS BAR IS A SPROCKET NOSE. Some bars have red or black paint...

THIS Oregon pro-lite BAR IS 14 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 52 DRIVE LINK CHAIN.THIS BAR has A heavy Duty SPROCKET NOSE with 3 rivets.CHAINS HAVE 91 STAMPED ON DRIVE LINK THAT FIT THIS BAR. Replaces pro-lite 140SPEA041...

New 16 inch Oregon bar and chain combo 3/8 low profile pitch .050 gauge 56 drive link and comes with a 91VXL056 chain. This Bar & Chain fit the following chainsaws with a 3/8 low profile sprocket: Allis Chalmers : 65, 75 CubCadet : CS3916...

THIS Oregon pro-am BAR 160SXEA041 AND CHAIN COMBO IS 16 INCH (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE 56 DRIVE LINK AND COMES WITH A 91VXL056 CHAIN. THIS BAR has A heavy Duty SPROCKET NOSE with 3 rivets. replaces 160SPEEA041 This Bar & Chain...

THIS POWERCUT BAR & CHAIN COMBO IS 20 INCH. 3/8 PITCH (1.3MM) .050 GAUGE 70 DRIVE LINK AND COMES WITH A 72EXL070 Pro full chisel CHAIN. THIS BAR IS A SOLID CONSTRUCTED METAL BODY WITH A REPLACEABLE ONE RIVET SPROCKET NOSE. THIS BAR &...

THIS DOUBLE GUARD BAR AND CHAIN COMBO IS 8 INCH (1.1MM) 3/8 PITCH LOW PROFILE .043 GAUGE 34 DRIVE LINK AND COMES WITH A 90PX034 CHAIN. THIS BAR IS A SPROCKET NOSE. THIS BAR FITS THE Oregon PS250 40V pole SAW WITH A 3/8 LP PITCH SPROCKET. This Bar...

THIS DOUBLE GUARD INTENZ BAR IS 10 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 40 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. Chain choices for this bar 91P X040G = Low-kick 91PXL040G = Low-kick 91VXL040G = Professional chain M...

120SDEA041 THIS DOUBLE GUARD BAR IS 12 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 45 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE.CHAINS HAVE 91 STAMPED ON DRIVE LINK THAT FIT THIS BAR. some bars have red or black paint on gray This...

THIS 551664 POWERSHARP KIT BAR/CHAIN COMBO IS 12 INCH CUT. Take your chain saw's chain from dull to sharp in as little as 3 seconds with the portable Oregon® PowerSharp® system. This lightweight bar-mount sharpener is small enough for...

Here is 1 new 16 inch Oregon bar part# 160SDET041. 3/8 low profile pitch .050 gauge and uses 56 drive link chain. This bar has the built in chain adjuster. This Bar fits the following chainsaws with a 3/8 low profile sprocket: Allis Chalmers :...

THIS Oregon AdvanceCut BAR 160SXEA041 IS 16 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 56 DRIVE LINK CHAIN.THIS BAR has A heavy Duty SPROCKET NOSE with 3 rivets.CHAINS HAVE 91 STAMPED ON DRIVE LINK THAT FIT THIS BAR. This Bar fits...

THIS DOUBLE GUARD INTENZ -(CHAIN TENSIONING MECHANISM BUILT IN) BAR IS 18 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 62 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This Bar fits the following chainsaws with a 3/8 low profile...

THIS Oregon PROLITE BAR IS 20 INCH is replaced with 200VXLHD176 new lightweight VersaCut bar. Aluminum core for less weight. Bar is (1.3MM) 3/8 PITCH .050 GAUGE AND USES 70 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. THIS BAR FITS THE FOLLOWING...