Chain Tools + Oil

Oregon 109644 replacement chain breaker punch fits most Oregon breakers and Total brands.

Works for breaking .043 gauge - such as 90SG, 90S,or 90PX

24548B Oregon bench model chain breaker. Drives out all rivets on 1/4" mini , .325 pitches ,3/8 pitches and .404 pitch saw chains.Comes with anvil and breker punches. This can break 3/4 inch chain with Retrofit kit part# 102616

39472 Oregon pocket chainsaw chain breaker.

easy to use - insert chain in anvil and hit punch with hammer to break chain.

Breaks 90 ,91 series ,1/4" mini ,.325  ,3/8 , and 404 pitches of Oregon saw chain

40469-A Oregon pre-filled grease gun.

This grese gun is used for greasing the bearings on sprocket nose bars.

grease helps reduce friction and enhance performance.

Helps prevent premature wear on bar noses and  bearings

Here is a nice depth gauge guide tool .Lay the tool over chain and file the depth gauges until level with the tool.File removes .025 for proper clearance at level.

loggers filing vise.

Drives into a stump to secure saw bar and saw  from moving while filing chain.

Makes filing chains easy out in the woods

536321 log lifting tongs

8 inch jaw opening . forged steel

Non slip leather handle.

Articulated joints.

easy moving of small logs

558488 Here is a nice Professional Maintenance Kit with 5/32" file and handle.Filing guide has marks stamped on top to line up with bar- match line for right filing angle and the guide will keep your file at the proper height to eliminate under...

Here is a Professional Maintenance Kit #558549 with 11/64"(4.5mm) file and handle.Filing guide has marks stamped on top to line up with bar- match line for right filing angle and the guide will keep your file at the proper height to eliminate...

Here is a Professional Maintenance Kit #558550 with 3/16" file and handle.Filing guide has marks stamped on top to line up with bar- match line for right filing angle and the guide will keep your file at the proper height to eliminate under...

Here is a Professional Maintenance Kit #558551 with 7/32" file and handle.Filing guide has marks stamped on top to line up with bar- match line for right filing angle and the guide will keep your file at the proper height to eliminate under...

Oregon bar and chain measuring tool.

pocket size tool for quick and easy chain identification.

measures

chain pitch

chain gauge

bar groove width

file size

25049 breaker anvil for 3/4" pitch chain. Chain inserts into this anvil to allow rivets to be removed.

100871 kit allows spinning of 3/4" pitch chains on Oregon 24549A spinner.

kit includes 1 anvil ,1 grease gun and 1 spinner handle.

57-001 SCRENCH OR COMBINATION WRENCH / SCREWDRIVER. 16mm X 11 mm

FITS HOMELITE 180 ,190 ,192 ,200 ,240 ,LX30(BANDIT) ,SERIES 2SX ,SUPER 2 ,SUPER XL2 ,XL ,XL-2 

MCCULLOCH MINI MAC SERIES ,POWER MAC SERIES ,PRO MAC510

57-003 SCRENCH OR COMBINATION WRENCH / SCREWDRIVER. 19mm X 10 mm OR 3/4" X 13/32 " FITS ECHO CS-SERIES 280 ,290 ,300 ,301 ,302 ,315 JOHN DEERE 30 ,40 OLEOMAC- OLYMPYK 234 ,240 ,241 ,244 ,340 ,930 ,935 SHINDAIWA 345 ,350 ,415 ,416 ,450 ,451 ,500

57-017 SCRENCH OR COMBINATION WRENCH / SCREWDRIVER. 13mm X 19 mm or 1/2" X 3/4" FITS DOLMAR ALL MODELS 109 -120 ECHO CS-500 ,510 ,550 ,601 ,602 ,610 ,650 ,660 ,701 ,750 ,900 ,1001 ,3900 ,4000 ,4500 ,4600 ,5000 ,5500 ,6700 ,8000 HUSQVARNA 33 ,38...

57-008 SCRENCH OR COMBINATION WRENCH / SCREWDRIVER. 17mm X 19 mm 17mm x 19mm Scrench Fits: • Dolmar 107, 122, 123, 128, 133, 143, 144, 152, 153, 166, 707 • Oleomac 260, 261, 264, 271, 272, 284, 480, 481, 482, 999F • Stihl 050, 051,...

Oregon Replacement grinding wheel for 108181 grinder

4 1/8" diameter wheel . 1/8" (3.2mm) thickness. 7/8 inch shaft size.

Used for smaller chains- 3/8 low profile such as 91VXL,VX SG series and 1/4" mini chains